Shark 200 Meter Manual

Shark 200 Meter Manual - The leader in p ower monitoring and smart grid solutions. The shark ® 200 power and energy meter is a low cost, powerful metering solution for large scale deployment within an electrical distribution system.

Pin On Speakmywatch

• for additional details about the meter and its operation, see the shark® 250 meter installation and operation manual.

Shark 200 meter manual. User manual | shark® 200 meter shark® 200 meter Page 82 as shown in figure 5.2, to connect a shark® 200 meter to a pc, you need to use an rs485 to rs232 converter, such as eig’s unicom 2500. The leader in p ower monitoring and smart grid solutions.

This is perfect for new installations and for existing panels. For existing panels, pull out old analog meters and replace them with the shark® 200 meter. Electro industries shark 200 logging.

Shark® 200 meter ansi and din mounting the unit mounts directly in an ansi c39.1 (4” round form) or an iec 92 mm din square form. • chapter 2 explains basic information about the modbus protocol and the shark® The shark® 200 meter is a multifunction, data logging, power and energy meter with waveform recording capability, designed to be used in electrical substations, panel boards, as a power meter.

Add high accuracy, data logging, power quality functionality, extensive communication, and i/o to existing or new power meter applications. View online quick start manual for shark 200 measuring instruments or simply click download button to examine the shark 200 guidelines offline on your desktop or laptop computer. Introduction ® the modbus map for the shark 200 meter gives details and information about the possible readings of ® the meter and its programming.

See shark meters manual for detailed wiring and installation instructions. This is perfect for new installations and for existing panels. Class 0.2 in energy, typical accuracy 0.1%.

For existing panels, pull out old analog meters and replace them with the shark® 200 meter. Electr o industr ies/gaug et ec h. Accuracy specifications in shark® 200 meter user manual.

This product is designed to incorporate advanced features in a cost effective, small package for. Shark® 200 meter qui c kstart. Hours by reservations only reserve online phone:

It contains a utility grade test pulse allowing power providers to verify and confirm that the meter is performing to its rated accuracy. In new installations, simply use din or ansi punches. **the shark® 200 meter’s ethernet communication settings are the default settings of address 1, baud rate 57.6 and protocol mod rtu.

This data is being extracted with the help of the advanced serial data logger (modbus rtu,ascii) or advanced tcp/ip data logger (modbus tcp) software only. In new installations, simply use din or ansi punches. Press the down arrow to choose another baud rate.

It may not applicable for other software. Shark®200 meter din mounting the unit mounts directly in an ansi c39.1 (4” round form) or an iec 92 mm din square form. The shark 200 meter can be programmed using the buttons on the face of the meter (chapter 6), or by using software.

Electr o industr ies/gaug et ec h. Electro industries/gaugetech electro industries/gaugetech e149701. Front serial port for programming once installed.

Page 107 appendix b modbus mapping and log retrieval ® for the shark 200 meter b.1: